Hot production floors slow workers down, stress equipment and raise heat-stress risk. Winsteam designs and installs factory heat extraction and ventilation systems that remove heat at the source and bring in fresh air — without the cost of air-conditioning the whole floor.
Remove the heat where it is generated, replace it with fresh air, and move air where people work.
Hoods and exhaust above ovens, furnaces, dryers, compressors and other heat-generating equipment, so heat is removed before it spreads across the floor.
Exhaust fans at high level to remove the hot air that collects under the roof, paired with suitable inlets.
Supply fans that bring in replacement air in a controlled way, so extraction works properly and doors are not slammed by negative pressure.
Directed air at workstations where people stand for long periods. Large-diameter, high-volume low-speed (HVLS) fans can be considered as part of the design where the building structure suits.
Upgrading undersized or ageing fans and ducts in existing ventilation systems that no longer keep up with production.
Scheduled servicing of exhaust and supply fans, belts, bearings and controls to keep airflow at design levels.
Ovens, roasters, fryers and steam processes.
Furnaces, heat treatment and machining.
Injection moulding and extrusion lines.
Large, high-roofed spaces with heat build-up.
Dryers, presses and curing equipment.
Equipment rooms that overheat and trip.
We walk the process with your production or facilities team, note where the contaminant or heat is generated, measure the space, and check existing fans, ducting, electrical supply and structure.
Extraction works best close to the source. We design hoods, capture points and duct routes around the actual process, then size fans for the airflow and static pressure the system needs — not a generic fan from a catalogue.
Ducting, fans and controls are installed in phases, outside shift hours or during planned shutdowns where needed, with method statements and risk assessments before mobilisation.
Airflow is measured and balanced at each capture point, controls are tested, and you receive as-built drawings and an O&M manual. Maintenance contracts available.
Factory ventilation is quoted from the site, not a catalogue. Sending these with your enquiry lets us come to the survey prepared — and quote faster.
Where it gets hot, roughly how hot, at what times of day, and what triggered the enquiry — worker complaints, equipment tripping, product quality.
Approximate floor area and ceiling height, and whether the area is enclosed, partly open or air-conditioned.
The heat-generating equipment involved and how many hours it runs, plus any existing fans or ventilation.
Phone photos of the work area, the process equipment and any existing fans or ducting. A short video helps even more.
Operating hours, shutdown windows, and whether the premises is owned or leased (landlord approval may be needed).
When you need it working — and whether there is an inspection, audit or complaint driving the date.
Tell us the problem and send a few photos. We’ll arrange a site survey at no obligation and tell you plainly what will work.
+65 9380 8176 · winsteam@winsteam.sg
Related services:
Fume Extraction · Dust Collection · Ventilation Contractor · Factory Ventilation & ACMV